10
azur 540D DVD player
OPERATING INSTRUCTIONS - THE DVD MENU DISPLAY
All of these menus are accessed from the blue Cambridge Logo screen
that appears when the DVD player is on with no disc in the tray. Pressing
the MENU button on the remote brings up the DVD menu display. It is
accessed by the cursors and select button in the centre of the remote.
General S
Setup
TV D
Display: Allows you to alter between 16.9 widescreen and 4.3
conventional image.
OSD LLang: Alters the language that the menu will appear in.
SCART: Switches the SCART output between RGB and Component. You
will need a suitably equipped television to handle a component signal.
Screensaver: If the DVD is left on and inactive, it will switch to a
screensaver to minimise energy consumption and screen burn. It can be
switched off here.
Logo TType: The 540D comes with a blue Cambridge Logo background
but it is also possible to "capture" a screenshot of a film and use this as
your default background instead. You can choose a screenshot from a
film by pressing the "LOGO" button on your remote control. This image is
stored and can now be used as a background on the menus.
Spectrum: This setting activates a graphic equaliser on the screen
showing the soundtrack. This is most useful for audio CD's.
Speaker S
Set U
Up
Downmix: Switches off the surround soundtrack (5.1 analogue output
section) and outputs a stereo signal from the stereo analogue output.
Front, C
Centre aand R
Rear S
Speaker S
Settings: adjusts the DVD decoder to
compensate between large and small speakers and the size of the
signal it sends to the subwoofer.
Subwoofer O
Off/On: Informs the player if a subwoofer is present. If it is
present the low frequencies are split off and sent to the subwoofer, if not
the complete audio spectrum will be heard through the front channel.
Channel D
Delay: Allows the distance between the listening position and
the centre, subwoofer, rear left and rear right speakers to be individually
set (in cm). This is to enable the surround sound to be optimised for
different listening room sizes and shapes.
Audio S
Setup PPage
EQ: Adjusts the final effect of the stereo output with a number of
optional presets.
Soundfield: Adjusts the final effect of the decoder output with a number
of surround effects presets.
SPDIF ooutput: Switches the digital audio section of the decoder/output
between bitstream (Raw) and uncompressed stereo digital out (PCM).
The bitstream (Raw) must be selected to enable surround sound (Dolby
digital/DTS) to be sent to an external decoder via the audio digital
output (coaxial or optical). If a only a stereo speaker system is to be
Summary of Contents for azur 540D
Page 114: ......
Page 115: ......
Page 116: ...azur 540D Part No AP14895 2 www cambridge a audio co uk ...
