background image

540R v3

azur

3

ENGLISH

Cambridge Audio warrants this product to be free from defects in

materials and workmanship (subject to the terms set forth below).

Cambridge Audio will repair or replace (at Cambridge Audio's option) this

product or any defective parts in this product. Warranty periods may vary

from country to country. If in doubt consult your dealer and ensure that

you retain proof of purchase.

To obtain warranty service, please contact the Cambridge Audio authorised

dealer from which you purchased this product. If your dealer is not

equipped to perform the repair of your Cambridge Audio product, it can be

returned by your dealer to Cambridge Audio or an authorised Cambridge

Audio service agent. You will need to ship this product in either its original

packaging or packaging affording an equal degree of protection.

Proof of purchase in the form of a bill of sale or receipted invoice, which

is evidence that this product is within the warranty period, must be

presented to obtain warranty service.

This Warranty is invalid if (a) the factory-applied serial number has been

altered or removed from this product or (b) this product was not

purchased from a Cambridge Audio authorised dealer. You may call

Cambridge Audio or your local country Cambridge Audio distributor to

confirm that you have an unaltered serial number and/or you purchased

from a Cambridge Audio authorised dealer.

This Warranty does not cover cosmetic damage or damage due to acts of

God, accident, misuse, abuse, negligence, commercial use, or modification

of, or to any part of, the product. This Warranty does not cover damage due

to improper operation, maintenance or installation, or attempted repair by

anyone other than Cambridge Audio or a Cambridge Audio dealer, or

authorised service agent which is authorised to do Cambridge Audio

warranty work. Any unauthorised repairs will void this Warranty. This

Warranty does not cover products sold AS IS or WITH ALL FAULTS.

REPAIRS OR REPLACEMENTS AS PROVIDED UNDER THIS WARRANTY ARE

THE EXCLUSIVE REMEDY OF THE CONSUMER. CAMBRIDGE AUDIO SHALL

NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR

BREACH OF ANY EXPRESS OR IMPLIED WARRANTY IN THIS PRODUCT.

EXCEPT TO THE EXTENT PROHIBITED BY LAW, THIS WARRANTY IS EXCLUSIVE

AND IN LIEU OF ALL OTHER EXPRESS AND IMPLIED WARRANTIES

WHATSOEVER INCLUDING, BUT NOT LIMITED TO, THE WARRANTY OF

MERCHANTABILITY AND FITNESS FOR A PRACTICAL PURPOSE.

Some countries and US states do not allow the exclusion or limitation of

incidental or consequential damages or implied warranties so the above

exclusions may not apply to you. This Warranty gives you specific legal

rights, and you may have other statutory rights, which vary from state to

state or country to country.

Plug Fitting Instructions (UK Only)

The cord supplied with this appliance is factory fitted with a UK mains plug
fitted with a 3 amp fuse inside. If it is necessary to change the fuse, it is
important that a 3 amp one is used. If the plug needs to be changed because
it is not suitable for your socket, or becomes damaged, it should be cut off
and an appropriate plug fitted following the wiring instructions below. The
plug must then be disposed of safely, as insertion into a mains socket is likely
to cause an electrical hazard. Should it be necessary to fit a 3-pin BS mains
plug to the power cord the wires should be fitted as shown in this diagram.
The colours of the wires in the mains lead of this appliance may not
correspond with the coloured markings identifying the terminals in your plug.
Connect them as follows:

The wire which is coloured BLUE must be
connected to the terminal which is marked
with the letter ‘N’ or coloured BLACK.

The wire which is coloured BROWN must be
connected to the terminal which is marked
with the letter ‘L’ or coloured RED.

The wire which is coloured GREEN/YELLOW
must be connected to the terminal which is
marked with the letter ‘E’ or coloured GREEN.

If your model does not have an earth wire, then disregard this instruction.

If a standard 13 amp (BS 1363) plug is used, a 3 amp fuse must be fitted,
or if any other type of plug is used a 3 amp fuse must be fitted, either in the
plug or adaptor, or on the distribution board. 

Limited warranty

Checking the Power Supply Rating

For your own safety please read the following instructions carefully

before attempting to connect this unit to the mains.

Check that the rear of your unit indicates the correct supply voltage. If

your mains supply voltage is different, consult your dealer.

This unit is designed to operate only on the supply voltage and type that

is indicated on the rear panel of the unit. Connecting to other power

sources may damage the unit.

This equipment must be switched off when not in use and must not be

used unless correctly earthed. To reduce the risk of electric shock, do

not remove the unit's cover (or back). There are no user serviceable

parts inside. Refer servicing to qualified service personnel. If the power

cord is fitted with a moulded mains plug the unit must not be used if the

plastic fuse carrier is not in place. Should you lose the fuse carrier the

correct part must be reordered from your Cambridge Audio dealer.

The symbol on this product indicates that it is of CLASS II (double

insulated) construction.

The lightning flash with the arrowhead symbol within an

equilateral triangle is intended to alert the user to the

presence of un-insulated ‘dangerous voltage’ within the

product’s enclosure that may be of sufficient magnitude

to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is

intended to alert the user to the presence of important

operating and maintenance instructions in the service

literature relevant to this appliance.

The crossed-out wheeled bin is the European Union symbol

for indicating separate collection for electrical and electronic

equipment. This product contains electrical and electronic

equipment which should be reused, recycled or recovered

and should not be disposed of with unsorted regular waste.

Please return the unit or contact the authorised dealer from

whom you purchased this product for more information.

Approvals

This product complies with European Low Voltage

(73/23/EEC) and Electromagnetic Compatibility

(89/336/EEC) Directives when used and installed

according to this instruction manual. For continued

compliance only Cambridge Audio accessories should be used with this

product and servicing must be referred to qualified service personnel.

NOTE:  THE  MANUFACTURER IS  NOT  RESPONSIBLE  FOR  ANY  RADIO  OR

TV   INTERFERENCE   CAUSED  BY   UNAUTHORIZED   MODIFICATIONS   TO

THIS   EQUIPMENT.   SUCH   MODIFICATIONS   COULD   VOID   THE   USER

AUTHORITY  TO  OPERATE  THE  EQUIPMENT.

This equipment has been tested and found to comply with the limits for

a Class B digital device, pursuant to Part 15 of the FCC Rules. These

limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates,

uses and can radiate radio frequency energy and, if not installed and

used in accordance with the instructions, may cause harmful

interference to radio communications. However, there is no guarantee

that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television

reception, which can be determined by turning the equipment off and

on, the user is encouraged to try to correct the interference by one or

more of the following measures:

- Re-orient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.

Safety precautions

Summary of Contents for Azur 540R V3

























Reviews: