background image

4

azur 540R AV receiver

REAR PANEL CONNECTIONS

FM /

/ A

AM a

antenna

All tuner antenna connections are made here.

Video o

out

S-Video out - Connect this to your television via an S-Video cable to
display the picture of any unit connected via S-Video to the 540R.

Composite Video out - Connect this to your television via an RCA phono
cable to display the picture of any unit connected to the 540R via
composite video.

S-V

Video iin

Video 1 / Video 2 - These can be used to connect any S-Video source to
the 540R.

DVD - Connect to the corresponding S-Video output terminal of a DVD
player to play through the 540R. Note that any source can be connected
here if desired.

Composite V

Video iin

Video 1 / Video 2 - Connect to the corresponding Composite output
terminal of a piece of video source equipment to play through the 540R.

DVD - Connect to the corresponding Composite output terminal of a DVD
player to play through the 540R. 

It is possible to connect any equipment with a Composite video output
to these inputs.

Coax iin

CD - Connect to the corresponding Coaxial Digital output terminal of a
CD player to play throught the 540R.

DVD - Connect to the corresponding Coaxial Digital output terminal of a
DVD player to play throught the 540R.

It is possible to connect any equipment with a coaxial digital output to
these inputs.

Optical iin

Video 1 / Video 2 - Connect to the corresponding Optical Digital output
terminal of a suitably equipped video player to play through the 540R.

DVD - Connect to the corresponding Optical Digital output terminal of a
DVD player to play through the 540R.

It is possible to connect any equipment with an Optical Digital output to
these inputs.

Coax O

Out

Connect to an external recording device to record selected digital audio
source.  

Optical O

Out

Connect to an external recording device to record selected digital audio
source.

Component iin

DVD - Connect to the Cr, Cb, Y terminals of a DVD player.

Video - Connect to the Cr, Cb, Y terminals of a games console or other
component equipped source.

Component O

Out

Connect to the Pr, Pb, Y terminals on a Television.

Reset

This is used to reset the whole system including all existing saved
information. Insert a paper clip and hold for approx 3 seconds. The unit
will be reset and all saved settings will return to factory default settings.

Audio IIn

CD/Aux - Connect to the line output terminals of a CD player.

Video 1 /Video 2 - Connect to the line output terminals of a video player.

DVD - Connect to the line output terminals of a DVD player.

Tape Play - Connect to the line output terminals on the Tape Deck.

Tape Rec - Connect to the line input terminals on the Tape Deck.

Any line level source can be connected to any of these inputs (except
Tape Play/Rec).

6.1 D

Direct IIn

Connect to the 7 channel output terminals of a DVD player for playing
DVD-A or SACD through the 540R.

6.1 D

Direct O

Out

Connect to the 7 channel input terminals of another amplifier, separate
power amps or active loudspeakers.

Speaker tterminals

Connect to loudspeakers with an impedance of between 4 and 8 ohms.

Power O

On /

/ o

off

Press this switch to turn on /off this unit.

Summary of Contents for Azur 540R













Reviews: