5
550C/650C
azur
Rear panel connections
AC power socket
Once you have completed all connections to the amplifier, plug the AC
power cable into an appropriate mains socket and turn the unit on. Your
compact disc player is now ready for use.
Power On/Off
Switches the unit on and off.
Control Bus
In
Allows un-modulated commands from multi-rooms systems or other
components to be received by the unit.
Out
Loop out for control bus commands to another unit.
IR (Infra Red) Emitter In
Allows modulated IR commands from multi-room systems or IR repeater
systems to be received by the unit. Commands received here are not
looped out of the Control Bus. Refer to the ‘Custom Installation’ section
for more information.
Line Output
Use good quality interconnect cables from these sockets to any line level
input on your amplifier. For best results and matched performance, we
recommend connection to a Cambridge Audio Azur amplifier.
S/P DIF co-axial digital output
For input to a separate DAC, such as Cambridge Audio DacMagic
*
, or
digital recording machine. To obtain best results, use a high quality
75ohm digital RCA interconnect cable (not one designed for normal audio
use).
TOSLINK Optical digital output
Use to connect to the input of a separate DAC
*
or digital recording
machine. Use a high quality TOSLINK fibre optic interconnect cable.
Note:
To obtain the best results from your system we recommend using
only high quality Cambridge Audio interconnects. This will ensure that you
hear your system as we designed it. Please ask you dealer for details.
* For more information, see the DacMagic page on the Cambridge Audio website:
www.cambridgeaudio.com/products.php
1
1
2
2
3
3
4
4
5
6
7
ENGLISH
5
6
7
