Audiophile grade oversize transformer and
substantial extruded heatsink allowing 2 x 75
Watts RMS into 8 ohms
6 inputs, 2 outputs and Tape In
Separate transformers for left and right
channels, twin rectifiers and separate PSUs
for dual mono operation of the left and right
power amps
Revised output stage using new Sanken
output transistors with external emitter
resistors for reduced thermal modulation and
increased current delivery
New ALPs film type ‘black box’ volume pot
for improved low level channel balance and
stereo imaging
Fully
updated
and
re-tuned
CAP5
protection
technology
to
enhance
performance at high volumes
New low dissipation polypropylene signal
capacitors and custom made electrolytic
capacitors in critical positions
EnergyStar certified ultra low power (<1W)
standby circuit
Brand new wrap-around casework design
with
substantially
thicker
brushes
aluminium front panel
Front mounted 3.5mm iPod/MP3 player
connection
Azur 650A Integrated Amplifier
Detailed Specifications
Power Output
75 watts (into 8 ohms)
THD (unweighted)
<0.002%@1kHz, 80% of rated power
<0.03% 20Hz
– 20kHz, 80% of rated power
<0.02% 20Hz
– 20kHz @10W
Frequency Response (-1dB)
5Hz
– 50kHz
S/N ratio (ref 1w)
>92dB (unweighted)
Input impedances
47kohms
Power amp damping factor
>100
Max. Power consumption
600W
Standby power consumption
<1W @rated mains
Bass/Treble controls
Shelving, ultimate boost/cut +/-7.5dB @20Hz
– 20kHz
Dimensions (HxWxD)
120 x 430 x 350mm (4.7 x 16.9 x 13.8’’)
Weight (unboxed)
8.4kg (18.5lbs)
Weight (boxed)
10.2kg (22.5lbs)
Version created: May 2009
