6
Inputs
USB audio
The 851N USB Audio input is intended to connect directly to a PC or Mac computer.
7KHGHIDXOW1FRQÀJXUDWLRQLV86%$XGLRSURÀOHZKLFKZRUNVZLWKQHDUO\
all common operating systems and computer types without needing additional
GULYHUV,QWKLVFRQÀJXUDWLRQVDPSOHUDWHVI]]DUH
supported.
For more details on USB Audio, see our online guides at:
www.cambridgeaudio.com/USB-audio.
D1-D5
7KHÀYHGLJLWDOLQSXWVDUHFDSDEOHRIUHFHLYLQJVWHUHR3&0DXGLRZLWKVDPSOHUDWHV
up to 24-bit/192kHz.
Bluetooth
The optional Cambridge Audio BT100 Bluetooth dongle can be connected into any
available USB socket.
Spotify connect
Spotify lets you listen to millions of songs – the artists you love, the latest hits and
discoveries just for you. If you are a Spotify Premium user, you can control your
851N using the Spotify app.
1. Connect your 851N to the same Wi-Fi network as your phone or tablet running
the Spotify app.
2. Open the Spotify app, and play any song.
3. Tap the song image in the bottom left of the screen.
4. Tap the Connect icon
.
5. Pick your 851N from the list.
For information on how to set up and use Spotify Connect please visit
www.spotify.com/connect.
The Spotify Software is subject to third party licenses found here:
www.spotify.com/connect/third-party-licenses.
Settings
Get registration key
Used to generate a unique temporary code, allowing the 851N to be registered with
your Stream Magic website account at www.stream-magic.com.
Network
Set-up Wi-Fi: Initiates Wi-Fi setup.
Enter network name: For manual entry of the network name.
&XUUHQWFRQÀJ'LVSOD\VFXUUHQWQHWZRUNVHWWLQJV
(GLWFRQÀJ
• Auto (DHCP).
YES
(recommended).
NO – settings are manually entered.
If 'NO' is selected, you will need to enter (using the navigator and select buttons)
the 851N's IP address, Network mask, Gateway address and DNS server(s).
Wi-Fi strength
Signal warning: On-screen warning of low Wi-Fi signal strength.
Wi-Fi region: Select the region that closest matches your location.
Wired/Wi-Fi:
• Auto (default).
• Wired only.
• Wi-Fi only.
Firmware
• Check for updates and display version number.
Display brightness
Device name
Rename the 851N.
Audio
• Digital pre-amp mode.
On – enables volume control.
2II²À[HGRXWSXW
Balance – only available if Digital Pre-amp Mode = On.
• USB audio class.
1.0 – for greatest compatibility with computers.
2.0 – allows high sample rate audio (up to 24-bit/192kHz sample rate. You may
need to download and install the Cambridge Audio USB Audio class 2.0 driver.
For further information on USB Audio: www.cambridgeaudio.com/USB-audio.
Remote control
Used when there is a clash with other products.
• 8 Series handset (24) (default).
• 8 Series handset (27) – alternate set IR remote control commands.
• No IR control – disables the 851N from responding to IR remote control
commands.
To use the alternate set IR remote control commands, both the 851N and the 851N
,5UHPRWHFRQWUROKDQGVHWPXVWEHUHFRQÀJXUHG
• 851N – select 8 Series handset (27) in the above menu.
• Remote control – perform the following steps:
Remove the batteries from the 851N IR remote control.
Press and hold the '851D/N' button while reinserting the batteries.
Note:
To restore the default 851N IR remote control command set, remove and
reinstall the batteries without pressing any buttons.
Language
Standby Mode
• Network Standby –network connections remain active and the Cambridge
Connect app can turn on the 851N.
• ECO mode – all audio, network and control circuits are shut down.
Automatic Power-down
Sets the time before entering Standby Mode after inactivity.
Edit Input Names
Allows you to customise the names of the digital inputs; USB Audio and D1 – D5.
Factory reset
Restores the 851N to the default factory shipping state.
Note:
Factory reset will delete all Wi-Fi networks and keys from memory; however
Presets associated with your Stream Magic website account remain.
