background image

4

Limited warranty

Ventilation

IMPORTANT

 – The unit will become hot when in use. Do not stack multiple 

units on top of each other. Do not place in an enclosed area such as a 

bookcase or in a cabinet without sufficient ventilation. 
Do not remove the feet from this product they are required to ensure enough 

air flow.
Ensure  that  small  objects  do  not  fall  through  any  ventilation  grille.  If  this 

happens,  switch  off  immediately,  disconnect  from  the  mains  supply  and 

contact your dealer for advice.

Positioning

Choose the installation location carefully. Avoid placing it in direct sunlight or 

close to a source of heat. No naked flame sources, such as lighted candles, 

should be placed on the unit. Also avoid locations subject to vibration and 

excessive dust, cold or moisture. The unit can be used in a moderate climate. 
This unit must be installed on a sturdy, level surface. Do not place in a sealed 

area such as a bookcase or in a cabinet. Do not place the unit on an unstable 

surface or shelf. The unit may fall, causing serious injury to a child or adult as 

well as serious damage to the product. Do not place other equipment on top 

of the unit.
Due to stray magnetic fields, turntables or CRT TVs should not be located 

nearby due to possible interference.
Electronic audio components have a running in period of around a week (if 

used  several  hours  per  day).  This  will  allow  the  new  components  to  settle 

down and the sonic properties will improve over this time.

Power sources 

The unit should be operated only from the type of power source indicated 

on the marking label. If you are not sure of the type of power-supply to your 

home, consult your product dealer or local power company.
This unit can be left in Standby mode when not in use and will draw <0.5W in 

this state. To turn the unit off, unplug it from the mains socket.

Overloading 

Do not overload wall outlets or extension cords as this can result in a risk of 

fire or electric shock. Overloaded AC outlets, extension cords, frayed power 

cords, damaged or cracked wire insulation and broken plugs are dangerous. 

They may result in a shock or fire hazard. 
Be sure to insert each power cord securely. To prevent hum and noise, do not 

bundle the interconnect leads with the power cord or speaker leads.

Cleaning

To clean the unit, wipe its case with a dry, lint-free cloth. Do not use any 

cleaning  fluids  containing  alcohol,  ammonia  or  abrasives.  Do  not  spray  an 

aerosol at or near the unit.

Battery disposal

Batteries may contain substances harmful to the environment. Please dispose 

of any discharged batteries with due consideration and in accordance with 

local environmental/electronic recycling guidelines.

Loudspeakers

Before making any connections to loudspeakers, make sure all power is 

turned off and only use suitable interconnects.

Servicing 

These units are not user serviceable. Never attempt to repair, disassemble or 

reconstruct the unit if there seems to be a problem. A serious electric shock 

could result if this precautionary measure is ignored. In the event of a problem 

or failure, please contact your dealer.

Cambridge Audio warrants this product to be free from defects in materials 

and workmanship (subject to the terms set forth below). Cambridge Audio will 

repair or replace (at Cambridge Audio’s option) this product or any defective 

parts in this product. Warranty periods may vary from country to country. If in 

doubt consult your dealer and ensure that you retain proof of purchase.
To obtain warranty service, please contact the Cambridge Audio authorised 

dealer from which you purchased this product. If your dealer is not equipped 

to perform the repair of your Cambridge Audio product, it can be returned by 

your dealer to Cambridge Audio or an authorised Cambridge Audio service 

agent. You will need to ship this product in either its original packaging or 

packaging affording an equal degree of protection.
Proof of purchase in the form of a bill of sale or receipted invoice, which is 

evidence that this product is within the warranty period, must be presented to 

obtain warranty service.
This  Warranty  is  invalid  if  (a)  the  factory-applied  serial  number  has  been 

altered or removed from this product or (b) this product was not purchased 

from a Cambridge Audio authorised dealer. You may call Cambridge Audio or 

your local country Cambridge Audio distributor to confirm that you have an 

unaltered serial number and/or you made a purchase from a Cambridge Audio 

authorised dealer.
This Warranty does not cover cosmetic damage or damage due to acts of 

God, accident, misuse, abuse, negligence, commercial use, or modification 

of, or to any part of, the product. This Warranty does not cover damage 

due to improper operation, maintenance or installation, or attempted repair 

by anyone other than Cambridge Audio or a Cambridge Audio dealer, or 

authorised service agent which is authorised to do Cambridge Audio warranty 

work. Any unauthorised repairs will void this Warranty. This Warranty does not 

cover products sold AS IS or WITH ALL FAULTS.
REPAIRS  OR  REPLACEMENTS  AS  PROVIDED  UNDER  THIS  WARRANTY 

ARE THE EXCLUSIVE REMEDY OF THE CONSUMER. CAMBRIDGE AUDIO 

SHALL  NOT  BE  LIABLE  FOR  ANY  INCIDENTAL  OR  CONSEQUENTIAL 

DAMAGES FOR BREACH OF ANY EXPRESS OR IMPLIED WARRANTY IN 

THIS  PRODUCT.  EXCEPT  TO  THE  EXTENT  PROHIBITED  BY  LAW,  THIS 

WARRANTY  IS  EXCLUSIVE  AND  IN  LIEU  OF  ALL  OTHER  EXPRESS  AND 

IMPLIED WARRANTIES WHATSOEVER INCLUDING, BUT NOT LIMITED TO, 

THE WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PRACTICAL 

PURPOSE.
Some  countries  and  US  states  do  not  allow  the  exclusion  or  limitation  of 

incidental or consequential damages or implied warranties so the above 

exclusions may not apply to you. This Warranty gives you specific legal rights, 

and you may have other statutory rights, which vary from state to state or 

country to country.
For any service, in or out of warranty, please contact your dealer.

Summary of Contents for CXA60















Reviews: