7
CX
N V2
7
6. DISPLAY
Displays the status of the unit.
7. (
i
) INFO
Pressing this button toggles between 'Now Playing' screen and the
different 'Now Playing' views.
8. HOME
Press takes you to Home screen.
9. INFRARED SENSOR
Receive IR commands from the supplied remote control. A clear
unobstructed line of sight between the remote control and the sensor is
required.
10. RETURN
Press to return to the previous menu.
11. (MORE)
When playing media over UPnP or USB drive, more will show the queue.
12. NAVIGATION/SELECT (ROTARY DIAL)
Rotate to scroll and navigate around the menus. Pressing the rotary dial
in performs the 'Select' function to accept the item/function shown on the
display.
FAST SCROLL FEATURE
When scrolling through lists of tracks or stations, normally rotating the
rotary encoder or press of the remote control navigator button steps to the
next item in the list. For long lists this can become tiresome.
The Fast Scroll feature, which is always enabled, detects how fast the front
panel rotary encoder is being rotated or how long the remote control
navigator buttons have been pressed. The faster the encoder rotation or
the longer the button press, the bigger the jump up or down the list with
each step.
If navigating using the front panel rotary encoder, reducing the speed of
rotation then decreases the step size again.
If navigating using the remote control, you need to release the button to
stop the scroll and press-and-hold the button again to begin the scroll
speed ramp-up, or single-press the button to step one item in the list at
a time.
Front panel controls
1. STANDBY/ON
Switches the unit between Standby mode (indicated by a dim power LED)
and On (indicated by a bright power LED). Standby is a low power mode
where the power consumption is <0.5W. The unit should be left in Standby
mode when not in use.
Note that the full startup sequence can take approximately 30 seconds to
complete.
ECO mode
If ECO mode is enabled, then the CXN v2 is in its default 0.5W standby
mode and the CXN v2 can be switched on from:
– Front panel power button,
– IR remote control power button with IR received on either the front panel
IR receiver.
NETWORK STANDBY
This is a higher power standby mode which allows the StreamMagic
module and wired or wireless network to remain powered. If this mode is
enabled then the CXN v2 can be switched on from the Cambridge Connect
app.
2. USB
Use to connect a USB storage device or another portable device containing
music files. 1A maximum current consumption.
Note: This USB port is not intended for connection to Apple mobile
devices, no functionality, charging or otherwise is supported.
3. SKIP
Press once to skip forwards or backwards one track.
4. PLAY/PAUSE
Plays and pauses playback.
5. STOP/DELETE
Press during playback to stop or press during playback to stop or delete
items in various menus.
CXN
1
2
4
10
8
11
7
12
6
3
5
9
Summary of Contents for CXN V2
Page 1: ...CXN V2 NETWORK PLAYER...
