7
Solo/ Duo
ENGLISH
1. AC POWER SOCKET
2. OUTPUT SOCKETS
Use phono cables to connect to any line level input on your
amplifier, such as Aux. NB. Do not connect to a phono input.
3. BALANCE
This control allows you to make fine adjustments to the
relative output levels of the left and right channels. In the
central position the output from each channel is equal.
4. MM INPUT SOCKETS
If your turntable uses a moving magnet cartridge, connect
outputs here (3-5mV, with 47k ohm, 100pF loading).
5. TURNTABLE GROUND
If your turntable has a separate grounding lead then connect
here. This provides shielding to the arm and the sensitive
circuitry in the turntable.
6. MC INPUT SOCKETS (DUO ONLY)
If your turntable uses a moving coil cartridge, connect outputs
here (0.3-1mV, with 100 ohm, 100pF loading).
