w w w . c a m b r i d g e - a u d i o . c o m
Tech specs
Azur 740A Advanced
Integrated Amplifier
Azur 740A features
Cambridge Audio’s policy is one of continuous improvement. Design and
specifications are therefore subject to change without prior notice.
Cambridge Audio
Hankey Place, London, SE1 4BB, England
© 2006 Cambridge Audio Ltd
Issued: Jaunuary 2007
ATF™ is a trademark of Analog Devices
Features
100 watts per channel
7 audio inputs, twin binding posts for A and B speakers
Silicon gate control for volume/input selection
providing
accurate channel balance and eliminates crosstalk and distortion
CAP5 – Five way protection system
(DC detection, over
temperature detection, overvoltage/overcurrent detection, short circuit
detection, intelligent clipping detection)
Massive oversized torodial transformer
Control Bus In/Out, IR Emitter
and
A-Bus
TM
Ready multi-
room outputs
for custom installation
Customisable input/source naming
Input gain trim
allows input levels to be harmonised and balanced
Pre-outputs
for connecting additional power amplifiers
Adjustable LCD brightness
Full-function aluminium face Azur Navigator remote control
which can control an iPod
TM
in a docking station
Available in Silver/black
Performance
Power output:
100W RMS into 8 Ohms
150W RMS into 4 Ohms
THD (unweighted):
<0.001% 1 kHz at 80% of rated power
<0.01% 20 Hz - 20 kHz at 80% of rated power
Frequencey response:
10 Hz - 50 kHz +/- 1 dB
S/N ratio:
(ref 1 W/8 Ohm) > 96 dB
Input impedances:
Inputs 1-6 68 k0hm
Tape Input 68 k0hm
Power amp damping factor:
> 110 at 1 kHz
Max power consumption:
750W
Minimum power consumption:
Active (no signal) 45W
Standby 6W
Bass and treble controls:
Shelving type
Max bass boost.cut +/- 10dB at 10 Hz
Max treble boost/cut +/- 7.5 dB at 20 kHz
Dimensions:
(H x W x D) 115 x 430 x 350mm (4.5 x 16.0 x 13.8”)
Weight:
10.7kg (23.5Lbs)
