background image

15

CD30

ENGLISH

Troubleshooting

There is no power

Ensure the AC power cord is connected securely.

Ensure the plug is fully inserted into the wall socket and is switched on.

Check the unit is switched on at the rear panel.

Check fuse in the mains plug or adaptor.

The player will not read the disc

Check the disc is not loaded upside down.

Check that the disc is not too scratched or dirty.

There is no sound

Ensure that the amplifier is set correctly.

Check that the interconnects are inserted correctly.

The disc is skipping

Check that the disc is not too scratched or dirty.

Ensure the player is on a firm surface and not subject to vibrations.

There is a hum coming from the speaker

Ensure that all cable connections are secure.

The remote handset will not function

Check that the batteries have not expired.

Ensure that nothing is blocking the remote sensor.

Check that the correct source is selected on the remote control i.e. CD30.

In the event that the above solutions do not remedy your problem, please consult
our frequently asked questions (FAQ) section on our website: 

www.cambridge-audio.com/sts/faqs

You can also use this facility to post a question to our Technical Support team.

For all servicing, in or out of warranty, please contact your dealer.

Disc types 

CD (CD-DA), CD-R/RW

D/A Converter

Wolfson Microelectronics 
WM8716 24-Bit/192kHz capable 

Frequency response

20Hz - 20kHz (+/-0.5dB)

THD

<0.003% @ 1Khz 0dBFs 
<0.005% 20Hz-20Khz 0dBFs

Linearity

+/- 1dB @ -90dBFs

Stopband rejection (>24kHz)

>90dB 

S/N ratio

>90dB 

Total correlated jitter

<300pS 

Crosstalk @1kHz

<-100dB Crosstalk @20kHz
<-80dB 

Output impedance

<50ohms 

Power Supply

All versions 100-240V AC ~ 50/60Hz

Max. power consumption

7W

Standby power consumption

<5W

Dimensions

270 x 67 x 285mm (WxHxD)

Weight

2.3kg (5.0lbs)

Technical specifications

Summary of Contents for SONATA CD30

















Reviews: