Programming disc play
1. Ensure that a disc is loaded and the player is in Standby mode.
2. Press
Program
on the remote control. The Program set-up will appear
in the display.
3. Using the
Skip/Scan
buttons, skip to the track number that you want
to program as your first track (or press the actual track number on
the remote).
4. Press
Program
. The desired track is now entered and the program
number increases by one.
5. Repeat steps three and four until all your desired tracks are entered.
6. Press
Play/Pause
. The programmed tracks will play.
7. You can use the Skip/Scan functions on your remote control to move
through your programmed selection in the same way as normal play-
back.
8. Pressing
Stop
once will stop play and pressing
Stop
twice at any time
will wipe the program and return the player to stopped mode.
