+
BASS
TREBLE
POWER/STANDBY
SPEAKERS
LINE IN
A
B
VOLUME CONTROL
L
R
+
+
+
CONNECTIONS
Volume Control
It is not necessary to connect the Volume Control if your
audio signal source provides an output level adjustment.
The volume control allows use with a source that do not
have volume control, or where the source’s volume con-
trol is inconvenient.
A) If you are using the ST50 Desktop Stand with
Newton Series MC50 or MC100 speakers, slide the
Volume Control onto the support strut on one
of the stands.
If you are not using the ST50 Desktop Stands, we
have included a piece of hook and loop fastner
material so that you may attach the control to any
convenient surface.
B) Insert the Volume Control’s plug into the jack
marked
VOLUME CONTROL
on the Subwoofer
input panel until it snaps in place.
Signal Connections
The BassCube 821 has two analog inputs.
C) LINE IN A:
Connect the 3.5 mm minijack output of
any analog signal source to this 3.5 mm stereo
minijack input.
LINE IN B
is a second audio input that blends
with
LINE IN A
. Connect a second audio source
program here. For a source with a 3.5 mm minijack
output (like a headphone jack or line out jack on a
portable CD player), use a 2-meter signal cable
with a 3.5 mm miniplug at each end. Other sources
may need a cable with a 3.5 mm miniplug and two
RCA plugs
or
a 3.5 mm stereo miniplug and
3.5 mm stereo minijack.
A
B
C
Line Inputs
Newton Series ST50 Desktop Stand –
recommended for MC50
and MC100 satellites
(optional)
9
9
9
9
