6
Rear view
Last updated: April 5, 2022 03:44. Revision #3652
1. Lid
2. Lid hinges and fasteners
3. Ground
4. Output level (Phone/Line) switch
With the switch position set to Line (Alva TT/ST), the internal phono stage will be used.
With the switch position set to Phono (External), an external phono stage needs to be used.
5. Signal output sockets
Caution - You must connect appropriately based on output level switch position.
6. Bluetooth status with LED On/Off switch
7. Bluetooth pairing button
8. Power socket
Alva TT v2: AC power socket
Alva ST: DC 12V 2.0A power adaptor socket