background image

3

CXU

ENGLISH

For your own safety please read the following important safety instructions 

carefully before attempting to connect this unit to the mains power supply. 

They will also enable you to get the best performance from and prolong the 

life of the unit:
  1. Read these instructions.
  2. Keep these instructions. 
  3. Heed all warnings. 
  4. Follow all instructions. 
  5. Do not use this apparatus near water. 
  6. Clean only with a dry cloth. 
 7.  Do not block any ventilation openings. Install in accordance with the 

manufacturer's instructions.

 8.  Do not install near any heat sources such as radiators, heat registers, 

stoves, or other apparatus (including amplifiers) that produce heat. 

 9.  Do not defeat the safety purpose of the polarized or grounding-type 

plug. A polarized plug has two blades with one wider than the other. A 

grounding-type plug has two blades and a third grounding prong. The 

wide blade or the third prong are provided for your safety. If the provided 

plug does not fit into your outlet, consult an electrician for replacement 

of the obsolete outlet. 

10.  Protect the power cord from being walked on or pinched, particularly at 

plugs, convenience receptacles and the point where they exit from the 

apparatus. 

11.  Only use attachments/accessories specified by the manufacturer. 
12.  Unplug this apparatus during lightning storms or when unused for long 

periods of time. 

13.  Refer  all  servicing  to  qualified  service  personnel.  Servicing  is  required 

when the apparatus has been damaged in any way, such as the power-

supply cord or plug having been damaged, liquid has been spilled or 

objects have fallen into the apparatus, the apparatus has been exposed 

to rain or moisture, does not operate normally, or has been dropped.

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO 

NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE AND OBJECTS 

FILLED WITH LIQUIDS, SUCH AS VASES, SHOULD NOT BE PLACED ON 

THIS APPARATUS.
Batteries (battery pack or batteries installed) shall not be exposed to 

excessive heat such as sunshine, fire or the like.

TO COMPLETELY DISCONNECT THIS APPARATUS FROM THE AC 

MAINS, DISCONNECT THE POWER SUPPLY CORD PLUG FROM THE AC 

RECEPTACLE. POUR DECONNECTER COMPLETEMENT L'APPAREIL DU 

RESEAU D'ALIMENTATION, DECONNECTER LE CORDON D'ALIMENTATION 

DE LA PRISE MURALE.
THE MAINS PLUG OF THE POWER SUPPLY CORD SHALL REMAIN 

READILY ACCESSIBLE. LA PRISE DU RESEAU D'ALIMENTATION DOIT 

DEMEURER AISEMENT ACCESSIBLE"
Only use the mains cord supplied with this unit.

This product utilises a Laser. Use of controls or 

adjustments or performance of procedures other 

than those specified herein may result in hazardous 

radiation exposure. Do not open covers and do not 

repair  yourself.  Refer  servicing  to  qualified 

personnel.

This label is located on the laser protective housing inside the product.

Important safety instructions 

The lightning flash with the arrowhead symbol within an equilateral triangle 

is intended to alert the user to the presence of un-insulated 'dangerous 

voltage' within the product's enclosure that may be of sufficient magnitude to 

constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the 

user to the presence of important operating and maintenance instructions in 

the service literature relevant to this appliance.

The symbol on this product indicates that it is of CLASS II (double 

insulated) construction.

WEEE symbol

The crossed-out wheeled bin is the European Union symbol 

for indicating separate collection for electrical and electronic 

equipment. This product contains electrical and electronic 

equipment which should be reused, recycled or recovered and 

should not be disposed of with unsorted regular waste. Please return the unit 

or contact the authorised dealer from whom you purchased this product for 

more information.

CE mark

This product complies with European Low Voltage (2006/95/

EC), Electromagnetic Compatibility (2004/108/EC) and 

Environmentally-friendly design of Energy-related Products (2009/125/EC) 

Directives when used and installed according to this instruction manual. 

For continued compliance only Cambridge Audio accessories should be 

used  with  this  product  and  servicing  must  be  referred  to  qualified  service 

personnel.

RCM (Regulatory Compliance Mark)

This product meets the Safety, EMC and Radio Communications 

requirements of the ERAC and ACMA.

CU-TR Mark

This product meets Russia, Byelorussia and Kazakhstan electronic 

safety approvals.

Ventilation

Important

 – The unit will become hot when in use. Do not stack multiple units 

on top of each other. Do not place in an enclosed area such as a bookcase 

or in a cabinet without sufficient ventilation.
Ensure that small objects do not fall through any ventilation grille. If this 

happens,  switch  off  immediately,  disconnect  from  the  mains  supply  and 

contact your dealer for advice.
Please ensure there is ample ventilation (at least 20cm clearance on the top, 

side and rear). Do not put any objects on top of this unit. Do not situate it on a 

rug or other soft surface and do not obstruct any air inlets or outlet grilles. Do 

not cover the ventilation grilles with items such as newspapers, tablecloths, 

curtains, etc.

Positioning

Choose the installation location carefully. Avoid placing it in direct sunlight or 

close to a source of heat. No naked flame sources, such as lighted candles, 

should be placed on the unit. Also avoid locations subject to vibration and 

excessive dust, cold or moisture. The unit can be used in a moderate climate.
This unit must be installed on a sturdy, level surface. Do not place in a sealed 

area such as a bookcase or in a cabinet. Do not place the unit on an unstable 

surface or shelf. The unit may fall, causing serious injury to a child or adult 

as well as serious damage to the product. Do not place other equipment on 

top of the unit.
Due to stray magnetic fields, turntables or CRT TVs should not be located 

nearby due to possible interference.
Electronic audio components have a running in period of around a week (if 

used several hours per day). This will allow the new components to settle 

down and the sonic properties will improve over this time.

Power sources

The unit should be operated only from the type of power source indicated 

on the marking label. If you are not sure of the type of power-supply to your 

home, consult your product dealer or local power company.
This unit can be left in Standby mode when not in use and will draw <0.5W in 

this state. To turn the unit off, unplug it from the mains socket.

Summary of Contents for CXU

















Reviews: