8
Front panel controls
1. Standby/On
Switches the unit between Standby mode (indicated by a dim power LED) and
On (indicated by a bright power LED). Standby is a low power mode where
the power consumption is <0.5W. The unit should be left in Standby mode
when not in use.
2. Skip
Press once to skip between tracks/chapters.
3. IR sensor
Receives IR commands from the supplied Navigator remote control. A clear
unobstructed line of sight between the remote control and the sensor is
required.
4. Disc tray
Use the Stop/Eject button to activate.
5. Display
Used to display the CXU's functions and playback state, etc. Please refer to
the front panel display section below for more information.
6. Eject
Press to eject the disc.
7. Play/Pause
Plays the disc and pauses playback.
8. USB port
7VY[MVYPU[LYMHJPUN[VHÅHZOTLTVY`JHYKVY4HZZ:[VYHNL+L]PJLZZ\JOHZ
a portable hard-drive).
Notes:
¶6US` <:) JLY[PÄLK WYVK\J[Z ^P[O [OL <:) SVNV VU [OLT HYL
supported by the CXU. Please either consult the manufacturer of the USB
WYVK\J[ [V THRL Z\YL P[ PZ WYVWLYS` JLY[PÄLK VY NV [V ^^^\ZIVYN
for a list of approved products. We cannot be held responsible for any
incompatibility issues.
– This unit supports "USB Mass Storage Class Bulk-Only Transport" devices
only. Most USB thumb drives, portable hard disk drives and card readers
conform to this device class. Other USB devices such as MP3 players,
digital cameras, and mobile phones may not be compatible.
¶:LL<:)WVY[ZLJ[PVUMVYÄSLZ`Z[LTJVTWH[PIPSP[`
9. MHL/HDMI input
This input is used to connect to a mobile source device such as a mobile
phone or a digital camcorder.
The combined socket allows either a standard HDMI source to be connected
to the CXU or alternatively an MHL device (such as some new phones) in
which case the device can also be charged whilst sending digital audio/video
to the CXU.
Note:
To utilise the MHL capability, the source device needs to be MHL
enabled and a MHL cable/adaptor is required.
Front panel display
1.
Mute icon
– Indicates that the audio is muted.
2.
Audio type indication
– Indicates the type of audio tracks being
played.
3.
Disc type indication
– Indicates the currently playing disc type.
4.
Main display
– Text messages and numeric display.
5.
Title
– When illuminated, the displayed time applies to a title.
6.
Group
– When illuminated, the displayed time applies to a group.
7.
Chapter
– When illuminated, the displayed time applies to a chapter.
8.
Track
– When illuminated, the displayed time applies to a track.
9.
Audio channel indication
– Indicates whether the audio being played
is 2ch stereo or multi-channel surround.
10.
Remaining
– When illuminated, the displayed time is the remaining
play time.
11.
Playback status
– Indicates playback status such as Play, Pause,
Repeat, Repeat all, and Random mode.
12.
Ethernet
– Indicates that an active Ethernet cable is attached.
13.
Wireless
– Indicates that the player is connected to a wireless
network.
1
2
3
4
5
6
7
8
9
11 12 13
CX
U
HDMI / MHL
10
1
2
3
6
7
8
9
4
5
