10
Remote Control
Last updated: 九月 2, 2022 12:51. Revision #5805
1. Standby/On
Switches the EDGE NQ between On and Standby mode.
2. Volume
Volume level adjustment.
3. Skip
Skips between previous and next tracks.
4. Play/Pause and Mute/Unmute
Play or Pause current track.
Press to mute or unmute the loudspeakers, pre-out, sub, and the headphone outputs.
Note: This remote function is source dependent. Where possible the source will be paused and for other sources the
output will be muted.
5. Source Selection
Used to navigate between the various sources on the player.
6. Programable Buttons
Press and hold to store the current source and its volume level.
Note: If the remote control will not function, please check that the batteries have not expired, and that there is nothing
blocking the front panel IR receiver.