6
Front Panel Controls
Last updated: 九月 2, 2022 12:51. Revision #5802
1. Standby/On
Switches the unit between Standby Mode (indicated by dim power LED) and On (indicated by bright power LED). Standby Mode is a low power mode (0.5
Watts). The unit should be left in Standby Mode when not in use.
2. Headphones
For suitable headphones – connection will automatically mute the pre-out. Headphones with an impedance of between 8 and 600 Ohm's are
recommended.
3. Display
4. Infrared sensor
To enable IR sensor commands from the remote control.
5. Volume/Source Selector
To change the volume, rotate the front part.
To select a source, rotate the back part.