background image

Notice 

CIG

 

has

 

the

 

sole

 

right

 

to

 

make

 

corrections,

 

modifications,

 

enhancements,

 

improvements,

 

and

 

other

 

changes

 

to

 

its

 

products

 

and

 

services

 

at

 

any

 

time

 

and

 

to

 

discontinue

 

any

 

product

 

or

 

service

 

without

 

notice,

 

CIG

 

has

 

the

 

final

 

interpretation.

 

This

 

version

 

is

 

effective

 

in

 

the

 

two

 

months

 

since

 

the

 

release

 

date.

 

Federal Communications Commission (FCC) Interference Statement 

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant 
to Part 15 of the FCC Rules. 
 
These limits are designed to provide reasonable protection against harmful interference in a residential 
installation. This equipment generate, uses and can radiate radio frequency energy and, if not installed 
and used in accordance with the instructions, may cause harmful interference to radio communications. 
However, there is no guarantee that interference will not occur in a particular installation. If this 
equipment does cause harmful interference to radio or television reception, which can be determined by 
turning the equipment off and on, the user is encouraged to try to correct the interference by one of the 
following measures: 
 

 

Reorient or relocate the receiving antenna. 

 

Increase the separation between the equipment and receiver. 

 

Connect the equipment into an outlet on a circuit different from that to which the receiver is     

connected. 

 

Consult the dealer or an experienced radio/TV technician for help. 

 
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 
(1)  This device may not cause harmful interference, and (2) this device must accept any interference 
received, including interference that may cause undesired operation. 
 
FCC Caution: Any changes or modifications not expressly approved by the party responsible for 
compliance could void the user’s authority to operate this equipment. 

 

RF exposure warning 

 

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.   
This equipment must be installed and operated in accordance with provided instructions and the 
antenna(s) used for this transmitter must be installed to provide a separation distance of at least 66 cm 
from all persons and must not be collocated or operating in conjunction with any other antenna or 
transmitter. 

 

Summary of Contents for WF-630R1





























Reviews: