3
II. Assembly
Parts Checklist
1 – Faucet spout (1)
2 – Towel holder (1)
3 – Soap dispenser (1)
4 – Waste water tanks – gray (2)
5 – Fresh water tanks – white (2)
Assembly Instructions
1. Install faucet spout by carefully positioning into center port and then
carefully tighten collar nut.
2. Snap paper towel roll into the towel holder making sure that the paper
tab comes over top of roll.
3. Make sure drain flex line is positioned so it can flow to either waste
tank when properly placed in lower compartment.
See Start Up & Daily
Operation
for details.
2. Towel Holder
3. Soap Dispenser
5. Fresh Water Tanks
4. Waste Water Tanks
2
1
3
