CM-110SK
Standalone Keypad
Installation Instructions
Page 1 of 6
1. Packing List
134"[44mm]
1
2
3
4
5
6
7
8
9
0
*
#
515
16
"
[150mm]
2. Description
The CM-110SK is a multifunctional standalone keypad with
a wiegand output for interfacing to an access control system.
It is suitable for mounting in either indoor or outdoor harsh
environments. It is housed in a strong, sturdy and vandal
proof Zinc Alloy electroplated case. The electronics are fully
potted so the unit is waterproof and conforms to IP68. This
unit supports up to 2000 users with a 4 digit PIN. The unit
has many extra features including lock output current short
circuit protection, wiegand output, and a backlit keypad.
These features make the unit an ideal choice for commercial
and industrial applications such as factories, warehouses,
laboratories, banks and prisons.
3. Features
• 2000 users, 4 digit PIN
• Backlit keys
• Zinc Alloy Electroplated anti-vandal case
• Waterproof, conforms to IP68
• Easy to install and program
• Full programming from the keypad
• Can be used as a stand-alone keypad
• Wiegand 26 input for connection to external reader
• Wiegand 26 output for connection to a controller
• Adjustable Door Output time, Alarm time, Door Open time
• Very low power consumption (30mA)
• Fast operating speed, <20ms with 2000 users
• Lock output current short circuit protection
• Built in light dependent resistor (LDR) for anti-tamper
• Built in buzzer
• Red, Yellow and Green LEDS display the working status
Qty
Name
Remarks
1
1
1
2
2
1
Keypad
User manual
Screwdriver
Wall plugs
Self-tapping screws
Torx screw
0.8” x 2.4”Φ(20 mm×60 mm)
0.24” x 1.2”Φ (6 mm×30 mm)
0.16” x 1.1”Φ(4 mm×28 mm)
0.12” x 0.24”Φ(3 mm×6 mm)
