background image

Page 14 of 33

CV-550 SPK V3 REFERENCE MANUAL 

INSTALLATION INSTRUCTIONS

3.7 Exit Management menu operation mode

In Management menu operation mode, press * more than once until the indicator light turns to red and always bright which con-
firms you have exited the Management menu operation mode.

3.8 User open door

When the indicator light is red and always bright, read card, or (input user PIN) #, or press exit button.

Note: When the door opens, there is a long “beep” sound, and the indicator light turns to green when the door is unlocked.

4. BASIC FUNCTIONS

4.1 Management menu operations

In all modes, enter the first zone management menu, the management system settings and the first zone related 
settings’ steps are:
 

key (Hold for more than 2 seconds), (Admin Password) # or to read zone 1 Set-card

Note: Admin Password is 6 digits, 888888 is the factory default admin password. User must change the Admin Password.  
A valid admin password is required otherwise the user cannot continue with other operations. If the Admin Password is 
correct, the indicator light will turn to green once and then back to red flash status. Other operations must be performed in 
this status. 
If the user forgets the admin password or the user needs to use the management menu many times, they can read the first 
zone Set-card operation instead.

4.1.1 Change Admin Password

 

00, (New Admin Password) #, (Repeat Admin Password)# 

 

Note: New Admin Password must be 6 digits

4.1.2 Set or delete Super-open-password

 

00,( 8 digits ) #, set Super-open-password 00,0000 #, delete Super-open-password

Note: these functions are available under the First zone management menu. 
Super-open-password has the highest permission to open the door and it can use to open the door anytime

.

4.1.3 Set admin card

 

01, 0#, read card, read card, …, Set 1-3 Set-cards. 

 

01, 1#, read card, read card, …, Set 1-3 Add-cards. 

 

01, 2#, read card, read card, …, Set 1-3 Delete-cards.

 

01, 3#, read card, read card, …, Set 1-3 Super-open-cards. 

 

01, 4#, read card, read card, …, Set 1-3 Anti-duress-cards. 

 

01, 5#, read card, read card, …, Set 1-3 Authorization-cards. 

 

01, 6#, read card, read card, …, Set 1-3 Normal-open-cards.

Note: Each type of admin card can be divided several times to set till to 3pcs.

Summary of Contents for CV-550SPK V3


































Reviews: