CV-940 Series
8. Configuring the Biometric Readers in CAMS Software
8.1 Adding a Biometric Reader
1. Expand the Door item to view the readers
2. Right click on the reader and select properties (8.1)
3. In the Basic tab, for “Type” of Reader select
“CV-940”. (8.2)
4. After selecting the type, a third tab will appear
“Biometric”. Go to that tab and put the serial number
of the Biometric Reader. (8.3)
Important Note:
The serial number of the reader can be
found on a sticker inside the reader, on the packaging box
and it can be search from the software (right click on the
portal/search devices/readers). (8.4 & 8.5)
To check if the reader is On Line, right click on the reader
and select “Check version”. In the Event Window a message
should appear “Device ON Line, Type: CV-940” (8.6)
8.1
8.2
8.4
8.6
8.3
8.5
Page 7 of 19
