Security camera cleaning robot
Let the lens shine!
Page
2
/
4
The installation
1. Attach the CAMDUSTER camera cleaning robot to the
security camera with worm gear clamp provided in the
package.
- Set the robot position to expected position on the
camera
- Put the protection plastic for the worm gear clamp to
prevent the scratching of the camera
- Tighten the screw on worm gear clamp to fix the robot
in the desired position
2. Set the length of the camera cleaning robot to
perfectly fit the security camera lens / objective and
tighten the fixing screw on cleaning robot arm. The best
position is when the middle of brush is at middle of the
lens.
3. Power up the CAMDUSTER security camera cleaning
robot
In case of POE power supply surveillance system, using
the POE separator and the DC splitter cable included in
the package:
-
introduce the RJ45 connector (on the
FTP/UTP cable for the security camera)
in
to the POE separator’s female part
-
introduce the POE separator’s male
RJ45
plug into the camera RJ45 female
connector
-
introduce the DC male connector (on POE
separator) into the female connector of
the DC power splitter cable
-
introduce one of the male DC connectors (on the DC power splitter cable) into
the
security camera’s female DC power source connector
-
introduce the second male DC connector (on DC power splitter cable) into the
CAMDUSTER security camera cleaning robot’s female DC power plug
