11
commissioning
via panel
Should the transmitter not operate as suggested above,
call CAME helpline
0115 921 0430
for technical support.
add
a transmitter button
1.
Press hold
button,
Confi guration
is displayed
2.
User management – New user
3.
Select the function to be assigned to the button
User mode – Step-by-step – Sequential – Open – Partial open – B1-B2 Output
4.
Waiting for code
will now appear on the screen.
Press and release a button on a transmitter, if the transmitter button has not been previously saved
User saved
will be displayed along with a user number. If the transmitter has been previously saved
Code already existing
will be displayed.
Repeat the same procedure for adding another button.
A maximum of 1000 individual buttons can be saved
remove
a transmitter button
1.
Press hold
button,
Confi guration
is displayed
2.
User management – Delete single user
3.
Select the transmitter button number to remove by using the < > keys and
Confi rm - YES
Repeat the same procedure to delete another transmitter button
remove
all transmitters
1.
Press hold
button,
Confi guration
is displayed
2.
User management – Delete all users
3.
Confi rm - YES
Repeat the same procedure to delete another transmitter button
transmitter
radio decoding
1.
Press hold
button,
Confi guration
is displayed
2.
User management – Radio coding
3.
Select the type of
Radio-frequency coding.
All decoding - Rolling code - TW key block
4.
Confi rm - YES
Ensure the AF card is fi tted (refer to the wiring diagram).
Summary of Contents for 8K01MI-0523
Page 30: ...notes ...
Page 31: ...notes ...
