p.
1
3
13
- M
an
u
al
c
od
e:
11
9
D
V
1
2
E
N
11
9
D
V
1
2
E
N
v.
4 - 0
1/
2
0
17 - © C
am
e S
.p.
A
. T
h
e c
onte
nts of th
is
m
an
u
al
m
ay b
e c
h
an
g
ed at a
ny ti
m
e w
ith
ou
t p
rio
r n
oti
ce
.
Adjusting the micro-switches
Operator fitted on the left.
Operator fitted on the right
.
Manually close the gate leaf, turn theupper cam counter-clockwise until the micro-switch activates. Fasten the cam by tightening
the center screws.
With the gearmotor released and with the gate-leaf open at maximum 110°, turn the lower cam clockwise until the micro-switch
activates. Fasten the cam by tightening the center screw.
With the gearmotor released and with the gate-leaf open at maximum 110°, turn the lower cam counter-clockwise until the
micro-switch activates. Fasten the cam by tightening the lateral screws.
With the gearmotor released and with the gate-leaf closed,turn the lower cam clockwise until the micro-switch activates. Fasten
the cam by tightening the center screw.
