FA00150-EN v.7 - 06/2017
39
CAME S.p.A.
17. AUTOMATIC SLIDING DOOR ROUTINE MAINTENANCE PLAN
To ensure proper operation and safe use of the automatic door, as required by European standard EN16005, the owner has
to perform routine maintenance by qualified personnel.
Except for routine cleaning of the door and any floor guides, that are under the responsibility of the owner, all maintenance
and repair work must be carried out by qualified personnel.
The following table lists tasks related to routine maintenance, and the frequency of intervention related to an automatic
sliding door operation with standard conditions. In the case of more severe operating conditions, or in the case of sporadic
use of the automatic sliding door, the frequency of maintenance can be consistently adequate.
Task
Frequency
Remove the power supply, open the automation and perform the following checks
and adjustments.
- Check all screws fastening of components within the automation.
- Check the cleanliness of carriage and rail.
- Check the correct belt tension.
- Check the state of belt wear and carriage wheels (if necessary replace them).
- Check the correct fitting of the doors on the carriages .
- If present, verify proper engagement of the locking device and the operation of
the release cord.
Every 6 months or every 500.000
cycles.
Connect the power supply and perform the following checks and adjustments.
- Check the correct operation of the control devices and safety.
- Check the detection area of the security sensors complies with the requirements
of the European standard EN16005.
- If present, verify the correct operation of the locking device.
- If present, verify the correct operation of the battery power device (if necessary
replace the battery).
Every 6 months or every 500.000
cycles.
Note: the verification of the
automation safety functions and
safety devices must be made at least
1 time per year.
All maintenance, replacement, repair, update, etc.. must be written into the proof book, as required by European standard
EN16005, and delivered to the owner of the automatic sliding door.
For repairs or replacements of products, original spare parts must be used.
17.1 DISPOSAL OF PRODUCTS
For correct disposal of electrical and electronic equipment, batteries and accumulators, the owner must
deliver the product to special "collection centres" provided by municipalities.
