19
BASIC SETUP FOR TYPICAL APPLICATIONS
1
Set the LANGUAGE:
Press and hold the
ENTER
button for 1 second to
see the menu on the display. Select
LANGUAGE
> (Choose the desired
language).
2
Set the basic function for the entrapment protection devices:
Select
FUNCTIONS
then select the following menus to either determine the
functionality or disable the entrapment protection devices:
•
Total Stop
>
Disabled
•
CX Input
> (Choose either
C1, C2, C3, C4, C7, C8,
or
Deactivated
)
•
CY Input
> (Choose either
C1, C2, C3, C4, C7, C8,
or
Deactivated
)
•
CZ Input
> (Choose either
C1, C2, C3, C4, C7, C8,
or
Deactivated
)
3
Select number of motors:
Select
IMP. RUN
>
No. Motors
(Choose
either
M1 & M2
for dual gates or
M2
for a single gate).
4
Select motor type:
Select
IMP. RUN
>
Motor type
>
FROG
5
Set the Configuration:
Select
FUNCTIONS
>
Config.
>
FCAP
RALLCH.
6
Set the End Stop:
Select
FUNCTIONS
>
endstop > N.O.
Basic setup of your operator is now complete. For additional programming and
settings refer to the "Menu Descriptions" pages.
BASIC SETUP FOR TYPICAL APPLICATIONS
PROGRAMMING
