P
age
16
- Manual
FA01610-EN
- 08/2021 - © C
AME S.p.A. - The contents of this manual may be changed at any time and without notice. - T
ranslation of the o
riginal instructions
Determining the travel end points with mechanical limit switches
Check that the boom is parallel to the road surface when it is in the closed position and at about 89° when it is in the open position.
Correct the boom’s horizontal position
Release the gearmotor.
Open the inspection hatch.
Lower the boom.
1
Turn the mechanical stop until you reach the desired boom position.
2
Fasten the mechanical stop with a locknut.
3
Check that the microswitch that detects the position of the boom clicks correctly.*
Lock the gearmotor
* Only for GPX40MCP, GPX40MGP and GPX40MXP.
+
_
2
1
1
3