~1°
~89°
+
-
+
-
~1°
~89°
+
-
+
-
page
19
- Manual
FA01260-IT
- 10/2018 - © CAME S.p.A. - The contents of this manual may be changed, at any time, and without notice
. - T
ranslation of the original instructions
Determination of travel end points
Activate the barrier to check whether the boom is parallel to the road surface when closed and at about 89° when open.
⚠
The boom's opening and closing maneuvers must be performed with the inspection hatch closed.
To correct the boom's vertical position:
- lower the boom;
- open the inspection hatch;
- turn the opening mechanical stop clockwise to increase the boom's travel or counter clockwise to reduce it
.
Fasten the stop with a counter nut
.
To correct the horizontal position:
- raise the boom;
- turn the closing mechanical stop clockwise to increase the boom's travel or counter clockwise to reduce it
.
Fasten the stop with a counter nut
.
Summary of Contents for I1PB0500026
Page 2: ...4 4...
