Page
20
- Manual
FA
01
65
1M
4A
- 0
6/2
022
- © CAME S.p.A.. - T
ranslation of the original instructions
The contents of this manual may change, at any time, and without notice.
F
Power-supply connector
G
Blue LED that indicates the device activity status
LED function
D
They turn up every time an activity is detected on the networks:
Green - Wi-Fi
Yellow - LAN
Red - radio frequency. If the LED fl ashes regularly (once per second) it
means that there are problems with radio frequency communication.
G
A fl ashing blue light indicates that the device is being confi gured.
A steady or pulsating blue light indicates that the device is operating;
this signal can be customised.
Function of the
C
button
Pressed for more than 5 seconds, it enables/disables the blue light
at the base of the device which indicates that the device is operating.
Pressed for more than 10 seconds and released after the blue LED
fl ashes, it returns to the following settings:
LAN: IP (static) = 192.168.1.80
Wi-Fi: Access Point (SSID:QBE_0x0373xxxx) = 192.168.9.1
Pressed for more than 30 seconds and released when the blue LED
remains on, it resets the whole system and network (as indicated
above).
Technical data
Models
USB power supply
Power supply (Vac)
100-240
Frequency (Hz)
50-60 Hz
USB output (V)
5 series
Maximum output current (mA)
2400 series
Models
QBEDFSB1
Power supply DC (V)
5 series
Consumption (mA)
200 series
Radio signal power at 868.65MHz (dBm)
10 series
Range of the 868.65MHz radio signal in a free
area (m)
100 series
Radio signal power at 869.5MHz (dBm)
14 series
Range of the 869.5MHz radio signal in a free
area (m)
200 series
Standard wireless (IEEE)
802.11b,
802.11g,
802.11n
WIFI frequency fi eld (MHz)
2,412 - 2,472
Maximum WIFI transmission strength (dBm)
18 series
Maximum length of the Ethernet Cat. 5 cable (m)
100 series
