12
CAMEC ELITE
®
2
EM303
Ref: ELITE 2 EM303-0715Rev.A.
•
Activate the remote control handset by sliding the slide switch to “On”-I (Fig.
10A). The green LED on the remote control handset (Fig. 10H) will start to
flash
slowly.
•
Press the reset button (Fig.
9A) on the control unit. All three LED’s on the
control
unit
(Fig.
9B,
9C
&
9D)
will
flash
slowly.
•
Press both the forwards (Fig. 10B) and reverse (Fig. 10C) button on the
remote control handset for about 3 seconds. The handset buzzer will give a
short
beep
to
confirm that
the
synchronisation is
complete.
•
After successful synchronisation, the green LED on the control unit (Fig. 9B)
and on the remote control handset (Fig. 10H) will illuminate continuously.
•
Repeat this procedure with the second electronic control unit.
•
Turn the remote handset “Off” and then “On” again so both control units will be activated.
The installation of the caravan manoeuvring system for twin axle use is now complete. For details of the operation,
use and all the LED and button functions, please refer to the table of contents.
