18
DMX
IT
ALIANO
POLSKI
ESP
AÑOL
FRANCAIS
DEUTSCH
ENGLISH
W-DMX
™
STATUS
W-DMX
deactivated
W-DMX
as receiver
activated,
not paired
W-DMX
as receiver
activated
and
paired,
Transmitter
switched off
or out of
range
W-DMX
as receiver
activated
and
paired,
no
DMX signal
W-DMX
as receiver
activated
and
paired,
DMX signal
is present
W-DMX
as trans-
mitter
with G3
standard
activated,
DMX signal
is present
W-DMX
as trans-
mitter
with G4s
standard
activated,
DMX signal
is present
W-DMX
as trans-
mitter
with G3
standard
activated,
no
DMX signal
W-DMX
as trans-
mitter
with G4s
standard
activated,
no
DMX signal
CONTROL MENU (Control)
The control menu enables selection of the various operating modes and their setting options in
the relevant sub-menus. DMX address and DMX operating mode are set in each operating mode
across all operating modes, if relevant.
DMX OPERATION VIA DMX CABLE
From the main display, press MENU to enter the Main Menu. Use UP and DOWN to select the
Control
menu and confirm with ENTER. Now select the
DMX
menu item and confirm again.
Information on the sub-menu items in the DMX menu and the corresponding setting options can
be found in the table below.
DMX
DMX address 001 - 4xx
Setting the DMX start address
Mode
17CH Basic
Selecting the DMX mode
19CH Standard
23CH Extended
W-DMX
Transmitter
Off
Deactivate sending of the DMX control signal via
W-DMX
On
Activate DMX control signal forwarding via W-DMX
Force to pair
Pairing with ready-to-pair W-DMX devices
Unlink All
Disconnect all W-DMX connections
Transmitting
Standard
G3
Selection of the W-DMX transmission standard
G4s
