28
DMX
IT
ALIANO
POLSKI
ESP
AÑOL
FRANCAIS
DEUTSCH
ENGLISH
QUICKLIGHT
Set a scene quickly and easily with the basic functions of the moving head without an external
controller. Starting from the main display, press MENU to enter the main menu. Select
Quicklight
using UP and DOWN and confirm with ENTER.
If the Quicklight mode is activated, the display does not automatically change to the main display;
when leaving the Quicklight menu, Quicklight mode is automatically terminated. The settings in
the Quicklight menu are retained until the next restart of the spotlight; as a result, Quicklight can
be accessed repeatedly with the same settings as long as the spotlight remains switched on.
After restart, the values in the Quicklight settings are reset (PAN = 000, TILT = 128, DIMMER =
255, ZOOM = 000, FOCUS = 000).
SETUP AND INSTALLATION
Thanks to its integrated rubber feet, the lamp can be positioned in a suitable location on a level
surface. Traverse installation can be achieved with the help of two Omega brackets, which are
attached to the base of the device (A). 2 x Omega brackets are included. Suitable beam clamps
are available as an option. Ensure firm connections and secure the spotlight to the securing lug
(B) with a suitable safety cable.
HAZARD:
Overhead mounting requires extensive experience, including the calculation of
the limit values for load, the installation materials and regular safety inspection of all
installation materials and spotlights. If you do not have these qualifications, do not
attempt to perform an installation yourself. Refer instead to a qualified professional.
There is a risk that devices that are incorrectly mounted and secured may come loose
and fall down. This can cause serious injury or death.
