>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
Aidite |
04
Chapter 1 | Safety Information
1.1.5
Non-professional personnel shall not approach the furnace, and all visitors must keep a safe distance
from the furnace.
1.1.6
It is very important to ensure that the carrying capacity of the lifting device is sufficient to bear the weight
of the furnace when unloading and installing.
1.1.7
Regularly check and clean signs and other safety posters related to product safety. If they cannot be
clearly identified within a reasonable distance, new signs and posters shall be replaced.
1.1.8
Before startup of the furnace every time, check all safety mechanisms to ensure that all protective
furnaces have been installed in place and can function normally. Once the safety furnace is found
invalid/faulty, it must be replaced in time. If it cannot be replaced in time, shut down the furnace.
Before switching on the furnace, all protective mechanisms temporarily removed to facilitate start-up,
modification, repair or maintenance of the furnace must be replaced and ensure that they are in the ideal
working order.
1.1.9
Before opening the furnace, remove all dangers which threaten operators.
1.1.10
Don't open the protective cover or start maintenance work until the furnace is closed, all moving parts
are completely stopped and the furnace is fixed to avoid accidental switching on (there are locking or
warning signs on the main switch).
1.1.11
Don't dismantle or change spare parts and safety mechanisms of the bypass device.
1.1.12
Don't use the furnace in a hazardous environment.
1.1.13
Ensure that your work area is well illuminated.
Summary of Contents for CFP-200
Page 1: ......