IT
ALIANO
POLSKI
ESP
AÑOL
FRANCAIS
DEUTSCH
ENGLISH
7
DMX
A
INSTALLATION
The device can be mounted to a traverse using the adjustable mounting bracket and a suitable traverse clamp (not supplied). Secure the
device to the safety eyelet using a suitable safety rope (A). Note: Overhead installation must be carried out by qualified personnel only.
The display is
rotated by 180°
(overhead installation)
on = display permanently on
off = display goes out after
about 60 seconds of inactivity
Reverse PAN direction
Reverse rotation direction
You can use this menu point to define
which operating mode is enabled
if the DMX signal is interrupted
when in DMX-mode.
UP/DOWN
UP/DOWN
/
-> ENTER
-> ENTER ->
<- MODE
-> ENTER ->
<- MODE
UP/DOWN
/
-> ENTER
-> ENTER ->
<- MODE
UP/DOWN
-> ENTER
/
-> ENTER ->
<- MODE
UP/DOWN
-> ENTER
/
-> ENTER ->
<- MODE
UP/DOWN
-> ENTER
/
/
-> ENTER ->
<- MODE
-> ENTER
<- MODE
Restore
factory settings
-> ENTER
<- MODE
Displays firmware
version
Last DMX command
is retained
Blackout
Auto programme
SYSTEM SETTINGS AND SYSTEM INFORMATION
To adjust system settings and access system information, press MODE repeatedly until the display shows “SEtt”. Confirm by pressing
ENTER. You can now use UP and DOWN to select and edit one of the following menu items:
Summary of Contents for NANO ROLL 100
Page 55: ......
