10
DEUTSCH
ENGLISH
DMX
IT
ALIANO
POLSKI
ESP
AÑOL
FRANCAIS
10
RUBBER FEET
Four rubber feet for good stability.
11
SECURING LUG
Securing lug for attaching the spotlight for truss installations.
12
HANDLE SCREWS
The two handle screws are for adjusting and fixing the stand and/or mounting bracket.
PORT FOR W-DMX™ CONNECTION
The USB-A port for the optional iDMX stick is located on the panel on the opposite side of the
spotlight.
OPERATION
NOTES
• As soon as the spotlight is properly connected to the power supply, “Welcome to Cameo”, the
model name, and then the software version are displayed one after the other on the display as
part of the startup process. Once the process is complete, the spotlight is ready for use and
resumes whichever mode was most recently activated.
• Hold down the MODE button for approx. two seconds to directly access the main display from
the lower menu levels. If there is no input within approx. two minutes, the main display is auto-
matically activated. Briefly press MODE to go up one level in the submenus.
• Press MENU and ENTER at the same time to go directly to the last edited menu option.
• Starting from the main display, briefly press UP to rotate the display 180°.
• Press and hold UP or DOWN to quickly change a value (e.g., DMX start address).
MAIN DISPLAY DMX MODE
The
DMX Address
and the currently configured DMX start address (in the example 001) are
shown on the display. If the DMX Delay function is activated, the delay group and the delay time
are also displayed.
MAIN DISPLAY STAND-ALONE MODE
The display shows the currently activated stand-alone mode (Mode Auto, Mode Sound, Mode
Static, Mode Color Preset, Mode User Color, Mode Loop).
Mode
Auto
Mode
Sound
Mode
Static
Mode
Color Preset
Mode
User Color
Mode
Loop
