User
Guide
Page 104
Event Handling
6.
Select
[ASSOCIATE SWITCH]
option and use
“
Left
”
or
“
Right
”
button to select
[YES]
and
enable
switch 1 only
for arm/disarm
associate switch. Switch 1 will be ON when
RX
is armed. Switch 1 will be OFF
when
RX
is disarmed. Switch 1 cannot
be activated by other events anymore if it is an
associate switch of arm/disarm.
7.
Select
[TAMPER EVENT ACTION]
option and
press “
Enter
”
button to select arm/disarm
tamper action. (For action, please refer to Event
Action Part in Advance Operation Section of User
Guide)
2. Security Switch
Security Switch
It is an input to the video recording server for wiring a security switch. The purpose of the
security switch is to terminate the exit delay for exit zone alarm. If the security switch is on and
the system is armed, all exit delay will be terminated. If the security switch is off and an entry
alarm is triggered, entry delays will start.
Security Switch Tamper Type
Security switch tamper event will be triggered if someone cuts the wire between the security
switch input and the video recording server. This event behaves as fire zone type that can be
triggered once the wire is being cut. Arm/Disarm tamper type has choice of none, SEOL and
DEOL.
On State
The security switch input circuit type is normal close (NC). When the state of the circuit is close,
it indicates security switch off of
RX
. Otherwise, when the state of the circuit is
open, it indicates security switch on of
RX
. The security switch input circuit type is
normal open (NO). When the state of the circuit is opened, it indicates security switch off of
RX
. Otherwise, when the state of the circuit is closed, it indicates security switch on
of
RX
.
Physical Configuration for Security Switch
The security switch input and ground of
RX
video recording server needs to connect
to a control circuit which is commonly the lock of the surveillance area for security switch input.
ARM / DISARM
ENABLED
YES
ARM STATE
CLOSE
TAMPER TYPE
DEOL
ASSOCIATE SWITCH
YES
TAMPER EVENT ACTION
…
ARM / DISARM
ENABLED
YES
ARM STATE
CLOSE
TAMPER TYPE
DEOL
ASSOCIATE SWITCH
YES
TAMPER EVENT ACTION
…
