User
Guide
Page 107
Event Handling
Example of Entry/Exit Zone WITH Security Switch Usage
For Entry Zone:
The entry delay is the period of time between entering the surveillance zone and reaching the
video recording server. In order to disarm the system for maintenance or repair, user / installer
needs to turn off the security switch and enter the surveillance zone. However, the delay time
starts from the 1st trigger by the 1st alarm sensor (i.e. Alarm 4). Note that if user enables
recording action, recording action is automatically activated during entry delay.
The detail procedure is as below:
1)
user turns off security switch
2)
the alarm is set at entry delay
3)
the 1
st
trigger is made by Alarm 4 (i.e. user enters the surveillance zone and the entry
delay time begins)
4)
2
nd
, 3
rd
and 4
th
trigger are made and each entry delay starts respectively
5)
user disarms the system for maintenance
For example: If the time for going from security switch to video recording server is about 8
minutes, Delay 1 should be longer than 8 minutes, while Delay 2 should be longer than the time
for going from security switch to Alarm 2, and so on.
Surveillance zone
Alarm 4
Alarm 3
Alarm 2
Alarm 1
Entry
Security Switch
Delay4
Delay3
Delay2
Delay1
Time line
RX
DISARM
