User
Guide
Page 109
Event Handling
Example of Entry/Exit Zone WITHOUT Security Switch Usage
For Entry Zone:
The entry delay is the period of time between entering the surveillance zone and reaching the
video recording server. In order to disarm the system for maintenance or repair, user / installer
enters the surveillance zone, and the delay time starts from the 1
st
trigger by the 1
st
alarm sensor
(i.e. Alarm 4) automatically. Note that if user enables recording action, recording action is
automatically activated during entry delay.
The detail procedure is as below:
1)
the alarm is at entry delay
2)
the 1
st
trigger is made by Alarm 4 (i.e. user enters the surveillance zone and the entry
delay time begins)
3)
2
nd
, 3
rd
and 4
th
trigger are made and each entry delay starts respectively
4)
user disarms the system for maintenance
For example: If the time for going from Alarm 4 to video recording server is about 8 minutes,
Delay 1 should be longer than 8 minutes, while Delay 2 should be longer than the time for going
from security switch to Alarm 2, and so on.
RX
DISARM
Surveillance zone
Entry
Alarm 4
Alarm 3
Alarm 2
Alarm 1
Delay4
Delay3
Delay2
Delay1
Time line
