User
Guide
Page 27
Basic Installation for Local and Remote Monitoring
11.b.8.
Run WX-30 software which has been installed to
the PC. (For details of WX-30 software
installation, please refer to WX-30 Software
Guide)
11.b.9.
Choose
[Transmitter]
[Registration]
to
register the
RX
video recording
server. User needs to input video recording server
serial number and registration code.
For example :
Serial No.
: VTC12345
Registration Code
: 1234567890
11.b.10.
Press
[Connect]
icon to pop up the
[Connect
Window]
. Type and select the following setting :
Phone/IP
: 192.168.0.2
Connect Using
: TCP/IP LAN
Password
: 000000
IP
(192.168.0.2) and
Password
(000000) are
default setting of
RX
If RX is set to advanced security mode, check
Advanced security mode
box and enter
User
Name
11.b.11.
Press
[Connect]
icon to connect your
PC to the video recording server. Live video is
shown on the WX-30 if success. Otherwise, the
[Warning]
board will pop up and show you
failure message. For failure case, please press
[Connect]
icon to check that the connection
setting is valid or not.