User
Guide
Page 29
Basic Installation for Local and Remote Monitoring
10/100 BASE-T
LINK COL
11.b.16.
In Windows 2000/XP desktop, select
Start
>
Control Panel
11.b.17.
Double click
Network and Dial-up Connections
> right click
Local Area Connections
and choose
Properties
.
11.b.18.
Choose
Internet Protocol
(TCP/IP) and click
Properties
11.b.19.
Enter the
IP address,
subnet mask
and
Default
gateway
for the PC to
restore to its original
network configuration
.
Note: The first 3 field of IP address should be
same as
RX
video recording server IP
and gateway address. IP address is
“210.17.139.146” and gateway address is
“210.17.139.1” in this example.
11.b.20.
Click
OK
to apply the settings
12.
Disconnect the
RX
video recording server and current PC. Reconnect the video
recording server and current PC to the LAN network through
straight-through Ethernet
cable
.
13.
Check Ethernet socket of both
RX
video recording server and PC to ensure that
the
{GREEN LINK LED}
turns ON. Then connection diagram is shown as below:
RG59 cable
RG59 cable
Power Adapter
Ethernet
Socket
CCTV
Monitor
RX
Cameras
Network switch
210.17.139.145
210.17.139.146
210.17.139.147
Straight-through Ethernet cable
