User
Guide
Page 45
Basic Installation for Local and Remote Monitoring
11.b.1.
In Windows 2000/XP desktop, select
Start
>
Control Panel
11.b.2.
Double click
Network and Dial-up
Connections
> right click
Local Area
Connections
and choose
Properties
.
11.b.3.
Choose
Internet Protocol (TCP/IP)
and click
Properties
11.b.4.
Enter an IP address, subnet mask and Default
gateway.
Note: IP address should be “192.168.0.xx”
except “192.168.0.2” which is
RX
default IP address.
11.b.5.
Enter the Preferred and Alternate DNS server, if
necessary.
11.b.6.
Click
OK
to activate the new IP.
You have to confirm that IP address has been
correctly set on your computer. On your
windows, click
start
>
run
, type “
cmd
” at
Open field and press
OK
button, then type
“
ipconfig
” on the DOS prompt, you will see an
IP set on your computer.
11.b.7.
Connect the PC Ethernet socket to the video
recording server Ethernet socket at rear panel of
the video recording server with
cross-over
Ethernet cable. Check if the
{LINK LED}
of
the video recording server is
ON
.
10/100 BASE-T
LINK COL
