8
Trigger the capture
There are two ways to trigger the capture remotely.
One is using CamFi Matrix by clicking the “Capture” button via network. To
trigger all the cameras to capture simultaneously,
please stop monitor before the
capture
. Then restart the monitor after the capture to transfer the photos. From our
test of 20 cameras, the delay between cameras in most of the shots was less than
1/200 seconds.
Another one is using wireless shutter release. Please change all the channels of the
devices to the same one before the capture. In our test, the latency between the 20
cameras was less than 1/400s. CamFi Matrix will monitor the capture and transmit
the photos automatically to the PC.
Reset all the photo numbers
The capture may fail when a camera is out of battery. The photo numbers need to
be reset to keep the photo names consistent. Please right click the CamFi list. Select
“Reset all photo numbers”. This will reset all the photo numbers to the max value.
Summary of Contents for Matrix
Page 1: ...CamFi Matrix User Guide ...
Page 5: ...3 Wifi network ...
