TECHNICAL MANUAL
City M
www.camfil.com
City M/Manual,
Ver. 001
September 2014
8
12. Taking into operation
First, read the entire Technical Manual.
Only appropriately qualified electricians may carry out work with electrical connections.
You must be able to turn off the power supply without touching the unit.
1. Connect the air purifier to the electrical outlet. Ensure that there is nothing obstructing the air
Outlets / inlets (see figure below how to operate).
Controller card description
Press + increase the airflow (the blue led indicators will guide you to what airflow you have chosen)
Press – (minus) to lower the airflow
A red warning light will be lit at the filter change symbol, when it’s time for filter replacement.
When the red warning light have been lit and filter are replaced you need to calibrate the unit by press + an- at the same time
during 5 seconds. Now you are secured that the warning light will be lit again when it’s time for filter replacement.
On the back side of the unit is the electrical connector with fuse holder and machine plate..
