Advanced Graphic Data Manager
Commissioning and use during operation
59
Setup – Inputs, submenu: digital inputs
Procedure for setting the signals of the digital inputs:
1. Start
▾
2. Select the function of the digital channel (also optionally possible via "Modbus" or "Profibus" fieldbus)
▾
▾
▾
▾
▾
▾
3. Control input
3. On/off event
3. Pulse counter
3. Operational time
3. Event + operation
time
3. Quantity from time
▾
▾
▾
▾
▾
▾
4. Enter channel
identifier
4. Enter channel
identifier
4. Enter channel
identifier
4. Enter channel
identifier
4. Enter channel
identifier
4. Enter channel
identifier
▾
▾
▾
▾
▾
▾
5. Select the action
5. Enter description for
"HIGH" and "LOW"
conditions
5. Enter the unit/
dimension
5. Where necessary,
enter the current
counter reading to
continue a totalizer
5. Enter description for
"HIGH" and "LOW"
conditions
5. Enter the unit/
dimension
▾
▾
▾
▾
▾
▾
6. End
6. Select whether the
event message has to be
acknowledged
6. Select the number of
decimal places
6. Select the display for
the counter type (e.g.
totalizer)
6. Select whether the
event message has to be
acknowledged
6. Select the number of
decimal places
▾
▾
▾
▾
▾
7. Choose whether the
event should be saved in
the event log
7. Enter the pulse
factor
7. End
7. Choose whether the
event should be saved in
the event log
7. Select the factor
Yes
▾
No
▾
?
Yes
▾
No
▾
▾
8. Enter
event text
for change
in status
from L->H
and H->L
8. End
8. Where necessary,
enter the current
counter reading to
continue a totalizer
8. Enter
event text
for change
in status
from L->H
and H->L
▾
8. Where necessary,
enter the current
counter reading to
continue a totalizer
▾
▾
▾
▾
▾
9. Record
duration?
9. Select the display for
the counter type (e.g.
totalizer)
9. Record
duration?
▾
9. Select the display for
the counter type (e.g.
totalizer)
▾
▾
▾
▾
10. End
10. End
10. Where necessary,
enter the current
counter reading to
continue a totalizer
10. End
▾
11. Select the display for
the counter type (e.g.
totalizer)
▾
12. End
