PM 1000288 000 00
Device handbook SIRAX BT5100
13/32
ON
O/P1
O/P2
COM
ON
O/P1
O/P2
COM
ON
O/P1
O/P2
COM
ON
O/P1
O/P2
COM
INPUT x012
O/P 12 y012
A
A
*
INPUT x012
O/P 12 y012
A
A
*
INPUT x012
O/P 12 y012
A
A
*
INPUT x012
O/P 12 y012
A
A
New / Change PT Secondary value
(*Denotes that digit will be fl ashing).
Pressing the “
Down” key will scroll the value of the Second digit from 0 through to 9, the value will wrap
from 9 round to 0.
Pressing the “
Up” key will advance the operation to the next digit and set the second digit, in this case to
“5”
Enter New / Change PT Secondary value, second digit entered, prompting for third digit.
(*Denotes that digit will be fl ashing).
Pressing the “
Down” key will scroll the value of the tthird digit from 0 through to 9, the value will wrap
from 9 round to 0.
Pressing the “
Up” key will advance the operation to the next digit and set the third digit, in this case to
“0”.
Enter New / Change PT Secondary value, third digit entered, prompting for fourth digit.
(*Denotes that digit will be fl ashing).
Pressing the “
Down” key will scroll the value of the fourth digit from 0 through to 9, the value will wrap
from 9 round to 0.
Pressing the “
Up” key will advance the operation to the next digit and set the fourth digit, in this case to
“0”.
New/changed PT Secondary value confi rmed.
Pressing the “
Down” key will re-enter to the “New / Change PT Secondary value”edit mode.
Pressing the “
Up” key will confi rm New PT Secondary value and advance to the Communication parame-
ter Selection (section 7.1.3).
ON
O/P1
O/P2
COM
7.1.3. Communication Parameter Selection :
7.1.3.1 Address Setting
This screen applies to the RS 485 output only.
This screen allows the user to set RS485 parameter for instruments. The range of allowable address is 1 to 247.
Pressing “
Down” key will advance to the “New/Change address value edit” mode.
Pressing the “
Up” key will confi rm the present value as Address and advance to Baud Rate selection
(section 7.1.3.2).
