PM 1000288 000 00
Device handbook SIRAX BT5100
17/32
7.1.5.2 Start value of Input
This screen allows the user to set the Start value of Input. Start value of Input can be set up to 80% of End value of Input.
ON
O/P1
O/P2
COM
ON
O/P1
O/P2
COM
INPUT x012
O/P 12 y012
A
A
INPUT
*
INPUT x012
O/P 12 y012
A
A
INPUT
ON
O/P1
O/P2
COM
ON
O/P1
O/P2
COM
ON
O/P1
O/P2
COM
INPUT x012
O/P 12 y012
A
A
INPUT
*
INPUT x012
O/P 12 y012
A
A
INPUT
*
INPUT x012
O/P 12 y012
A
A
INPUT
ON
O/P1
O/P2
COM
INPUT x012
O/P 12 y012
A
A
INPUT
New/changed End value of Input confi rmed.
Pressing the “
Down” key will re-enter to the “New / Change End value of Input edit” mode.
Pressing the “
Up” key will confi rm New End value of Input and advance to the Start value of Input selecti-
on (section 7.1.5.2).
Pressing the “
Down” key will enter the “New/Change
Start value of Input edit” mode.
Pressing “
Up” key will confi rm the present value as Start value of Input and advance to the Elbow functi-
on selection (section 7.1.5.3)
New / Change Start value of Input
(*Denotes that digit will be fl ashing).
Pressing the “
Down” key will scroll the value of the second digit from 0 through to 9, the value will wrap
from 9 round to 0 depending on set value of End vale of Input.
Pressing the “
Up” key will advance the operation to the next digit and set the second digit, in this case to
“0”.
Enter New / Change Start value of Input, second digit entered, prompting for third digit. (*Denotes that digit
will be fl ashing).
Pressing the “
Down” key will scroll the value of the third digit from 0 through to 9, the value will wrap
from 9 round to 0 depending on set value of End vale of Input.
Pressing the “
Up” key will advance the operation to the next digit and set the third digit, in this case to
“5”.
Enter New / Change Start value of Input, third digit entered, prompting for fourth digit. (* denotes that digit will
be fl ashing).
Pressing the “
Down” key will scroll the value of the fourth digit from 0 through to 9, the value will wrap
from 9 round to 0 depending on set value of End vale of Input.
Pressing the “
Up” key will advance the operation to the “New / Changed Start value of Input” and set the
fourth digit, in this case to “0”.
New/changed Start value of Input confi rmed.
Pressing the “
Down” key will re-enter to the “New / Change Start value of Input edit” mode.
Pressing the “
Up” key will confi rm New Start value of Input and advance to the Elbow function selection
(section 7.1.5.3).
