7
Version 1.5
English
6
Ice Master
®
E-Series
English
1)
Wind the hose reel handle into place.
Setting-up the Sprayer
GETTING STARTED
GETTING STARTED
5)
Feed the wire harness through the
whole in the back of the metal box.
6)
Connect the cables to the pumps.
Make sure to plug in the correct
connectors to the corresponding pumps
as shown in this image.
3)
If you wish to mount a boom, add the
bolts and plastic washers to each of the
boom brackets.
4)
Connect the brackets to the frame
and loosely secure them in order to
mount the boom.
Setting-up the Sprayer
2)
If you ordered a hitch mount boom for
your Ice Master® E-Series unit, you can
mount it to the hitch on your pickup.
7)
Run the power cable up to your cab
and connect it to your controller.
8)
Connect the controller to the power
cables.
