7
Version 1.7
English
GETTING STARTED
1)
Route the cable to your vehicle
battery and connect the battery clips to
the battery.
3)
Before turning your pump on, make
sure the pressure regulator is fully open
(counter clockwise) to avoid premature
wear or damage to the pump. This will
allow liquid to flow through return line
back into tank.
4)
Ensure the valve between the tank
and pump is in open position before you
turn the pump on. This will ensure pump
does not run dry. Handle should be par-
allel to hose for open position.
Setting Up & Operating Sprayer
2)
Take tank lid off and fill tank at
least 1/4 full with water, enough to
run through the system to check all
components are functioning correctly.
